View BPC-6170_4866718.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BPC-6170
15" Industrial Panel PC with MainBoard, four PCI slots, Touch Screen, 300W ATX P/S
Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advised of the possibility of such damage(s). This manual is copyrighted and BOSER Technology Co., Ltd. reserves all documentation rights. Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. BOSER Technology Co., Ltd. reserves the right to change or improve the contents of this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does it make any commitment to update the information contained herein.
Trademarks Trademarks
BOSER is a registered trademark of BOSER Technology Co., Ltd. ISB is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc. AMI is a registered trademark of AMI Software, Inc. All other trademarks, products and or product names mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners.
(c) Copyright 2008 BOSER Technology Co., Ltd. All Rights Reserved. Edition 1.1, May 15, 2009
Table of Contents
Chapter 1
1.1 1.2 1.3 1.4 1.5
General Description ..................................1
Major Features ....................................................................... 2 Specifications ........................................................................ 2 Panel Specifications ............................................................. 4 Control Keys .......................................................................... 4 Dimensions ............................................................................ 4
Chapter 2 Chapter 3
3.1 3.2 3.3 3.4 3.5
Unpacking ..................................................5 Hardware Installation ..............................7
2.1 Opening the Delivery Package............................................. 5 2.2 Inspection............................................................................... 5 Open the Cover...................................................................... 7 HDD/FDD/CD-ROM Installation ............................................ 9 Fan Installation .................................................................... 11 SBC Installation ................................................................... 12 Wallmount Installation ........................................................ 13
Chapter 4
Touch Screen Deriver Installation ........15
4.1 Touch Screen Driver Installation ....................................... 15 4.1.1 Installing Touch Screen Driver in WIN95/98.................................15 4.1.2 Installing Touch Screen Driver in WIN2000 ................................... 17 4.2 Driver Functions .................................................................. 20 4.2.1 PenMount Control Panel...........................................................................20 4.2.2 PenMount Monitor........................................................................................21
Declaration of Conformity -- CE Mark
BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU's EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below:
Equipment Class: Product Model Series: This Product Complies With:
Information Technology Equipment BPC-6170 EN55022: Class A for Radiated emissions EN50082-2: Heavy Industrial EMC Immunity
We, the undersigned, hereby declare that the equipment specified above conforms to the above directives and standards.
Manufacturer:
BOSER TECHNOLOGY CO., LTD.
Safety Instructions
The safety recommendations outlined in this section are to be read, understood and followed before operating the product. Keep this information in a safe place for future reference. Failure to comply with any of the following safety procedures could result in serious hazard.
Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway Do not insert objects into openings Do not immerse product in water or permit liquids to spill inside Turn off power when unattended or not in use. Unplug product before moving it or when it is not in use for an extended period of time. The socket-outlet shall be installed near the equipment and shall be easily accessible Do not alter or extend electric plug. Plug is configured for appropriate electrical supply Do not overload electrical outlets beyond their capacity as this can result in a fire
NOTE:
DO NOT TOUCH THE PRODUCT OR ANY OTHER SENSITIVE COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC PROTECTIONS.
Life Expectancy of Constituent Parts
This section describes the life expectancy of constituent parts (backlight, power supply, internal cooling fan and touch screen) which make up to BPC-6170.
TFT Display Backlight Display brightness decreases over time with use. The expected operating lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours (assuming continuous lit state at 25 degrees C). Actual lifetime before replacement is about 30,000 hours, although this depends on operating conditions. Touch Screen The operating lifetime of the touch screen is approximately 1 million operations (as tested by mechanical manipulation under 100g of force at a rate of two presses per second)
Chapter 1
General Description
The BPC-6170 is an industrial-grade panel PC that provides convenient expandability through 4 to 5 32-bit PCI system slots. The rear design of BPC-6170 enhances the disassembly process when required. A single drive bay is available for one HDD that can be easily installed before assembly. The BPC-6170 has a 15" display and a touch screen that operates under all types of working environment. It also comes with a reliable power supply and one 8cm ball bearing cooling fan that enhance system stability. The unit can also be mounted in several configurations. A variety of BOSER SBCs is compatible with the BPC-6170. The BPC-6170 is IBM PC/AT compatible and can draw from a large body of hardware and software resources worldwide 300W power supply with UL, CE, CSA, TUV approved
1
The user can select the operating system he wants to use just like an ordinary personal computer. An operating system such an MS-DOS, Windows can be selected to suit the application. The BPC-6170 features an all-in-one flat display. Keyboard less operations are possible through the use of a touch screen. In addition to a watchdog timer indispensable in FA applications. You can select from a broad range of variations to arrive at the optimum configuration for your application and budget.
1.1
Major Features
Aluminum front panel 15" TFT color panel display Built-in touch screen, OSD key, HPCI-6S, 300W ATX P/S Provides Intel(R) Pentium(R) 4/Celeron(R) D/CoreTM 2 Duo Desktop/Pentium(R) 4/Celeron(R) D (by M/B) Onboard graphics, Ethernet controller (by M/B) Parallel, COM, USB2.0, PCI expansion slot x 4 (by M/B) 3.5" HDD/FDD space x 2, slim CD-ROM space x 2 8cm ball bearing cooling fan x 1
The BPC-6170 series comes with the following features:
1.2
Specifications
System Board: HS-7004 full-size SBC CPU: Intel(R) Pentium(R) 4/Celeron(R) D processor in the LGA775 Package Memory: Two DDRII sockets support max. up to 2GB Chipset: Intel(R) 915GV/ICH-6 Backplane: HPCI-6S backplane PCI Slot: PCI expansion slot x 4 OSD: Provides OSD function Touch Screen: 15" resistive touch screen Display: Onboard graphics controller Ethernet: Onboard Intel(R) 82562GZ 10/100 Based LAN controller Storage: 3.5" HDD/FDD space x 2 Slim CD-ROM space x 2 Parallel: Standard parallel port x 1
BPC-6170-P
2
Serial Port: 1 port USB: USB2.0 port x 2 Keyboard/ Mouse: PS/2 6-pin Mini DIN BIOS: Award BIOS with 4 Mb Flash EEPROM Watchdog Timer: Reset; 1 sec. ~ 255 min. and 1 sec. or 1 min./step Power In: 300W ATX power supply Thermal System: 8cm ball bearing cooling fan x 1 EMC: CE, FCC Front Panel Protection: IP65 Temperature: 0~+45C (operating); -20~+70C (storage) Dimensions: 43.0(L) x 32.1(H) x 18.69(W) cm
BPC-6170-W
System Board: HS-7005 full-size SBC CPU: Intel(R) CoreTM 2 Duo Desktop/Pentium(R) 4/Celeron(R) D processor in the LGA775 package Memory: Two DDRII socket supports max. up to 2GB Chipset: Intel(R) 915GV/ICH8DO Backplane: HPCI-6S backplane PCI Slot: PCI expansion slot x 4 OSD: Provides OSD function Touch Screen: 15" resistive touch screen Display: Onboard graphics controller Ethernet: Onboard dual 10/100/1000 Based LAN controller Storage: 3.5" HDD/FDD space x 2 Slim CD-ROM space x 2 Serial Port: 3 port USB: USB2.0 port x 2 Keyboard/ Mouse: USB device BIOS: AMI BIOS with 8 Mb Flash EEPROM Watchdog Timer: Reset; 1 sec. ~ 255 min. and 1 sec. or 1 min./step Power In: 300W ATX power supply Thermal System: 8cm ball bearing cooling fan x 1 EMC: CE, FCC Front Panel Protection: IP65 Temperature: 0~+45C (operating); -20~+70C (storage) Dimensions: 43.0(L) x 32.1(H) x 18.69(W) cm
3
1.3
Panel Specifications
Screen Size: 15 inches Display Format: 1024 x 768 pixels Pixel Pitch: 0.3075(H) x 0.3075(V) m/m Color: 262K Brightness: 350 cd/m2 Contrast Ratio: 400:1 MTBF: 50,000 hrs.
1.4
Control Keys
OSD Control Keys Define
Menu: Menu/Item select Down: Cursor down control Up: Cursor up control Return: Return to menu
1.5
Dimensions
4
Chapter 2
Unpacking
2.1 Opening the Delivery Package
The BPC-6170 is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety instructions in front of this manual describe anti-static precautions and procedures.
2.2
Inspection
After unpacking the Panel PC, place it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment. Ground the board and exercise extreme care to prevent damage to the board from static electricity. Integrated circuits will sometimes come out of their sockets during shipment. Examine all integrated circuits, particularly the BIOS, processor, memory modules, ROM-Disk, and keyboard controller chip to ensure that they are firmly seated. The BPC-6170 delivery package contains the following items: BPC-6170 x 1 Power Cable x 1 Drive CD Disk x 1 System Board User's Manual x 1 BPC-6170 User's Manual x 1 Touch Screen Drive Diskette x 1 It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately.
5
This page intentionally left blank.
6
Chapter 3
Hardware Installation
This chapter tells how to install components into the Panel PC system. External interface please refers to system board's manual.
3.1
Open the Cover
1. Remove screws from the top and bottom cover accordingly
7
8
3.2
HDD/FDD/CD-ROM Installation
1. Remove the drive bay holding bracket
9
2. Remove the drive cover plate from the drive bay holding bracket
3. Install the CD_ROM
4. Install the HDD disk drive or floppy drive
5. Install the drive holding kit with drives back to the system
10
3.3
Fan Installation
1. Remove the fan holder and install the fan completely
11
3.4
SBC Installation
1. Remove the SBC holding bracket
2.Install the SBC and tie it up with the SBC holding bracket
12
3.5
Wallmount Installation
13
This page intentionally left blank.
14
Chapter 4
Touch Screen Driver Installation
This chapter contains the detailed information of touch screen driver installation procedures. The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the touch screen driver. The following sections describe the installation procedures of driver based on WIN2000 operating systems. It is recommended that you install the drivers matching the sections listed in this chapter.
4.1
1. 2.
Touch Screen Driver Installation
Insert Utility CD disk to your CD-ROM drive. The main menu will pop up as shown below. The screen displays copying "Installation Wizard" and "PenMount Utilities Installation" screen plus "welcome" message appear, click on Next>.
4.1.1 Installing Touch Screen Driver in WIN95/98
15
3.
The next screen is "Software License Agreement", select "I accept" and click on Next>.
4.
The next screen is Ready to Install the Program, click on Install.
16
5.
Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard.
4.1.2 Installing Touch Screen Driver in WIN2000
1. 2. Insert Utility CD Disk to your CD-ROM drive. The main menu will pop up as shown below. The screen displays copying Installation Wizard and PenMount Utilities Installation screen plus welcome message appear, click on Next>.
17
3.
The next screen is Software License Agreement, select I accept and click on Next>.
4.
The next screen is Ready to Install the Program, click on Install.
18
5.
Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard.
19
4.2
Driver Functions
4.2.1 PenMount Control Panel
Calibrate To adjust the display with touch screen, click on Calibration and follow the calibrate point to do calibration, there are five points on screen for calibration.
Draw Test or demonstrate PenMount touch screen operation, also the touch location is shown on the display, touch DRAW to start.
20
About It shows information about PenMount controller and this driver.
4.2.2 PenMount Monitor
The PenMount monitor icon is shown in the menu bar of WIN2000 system when turn on PenMount monitor from PenMount Utilities.
There are several functions on PenMount monitor: Right Click Button When select this function, there is a mouse icon shown in the right-button place of screen. It shows Left Button being as default for normal use, touch this mouse icon to change the next touch to be Right Button function. After one touch, the mouse icon will change to Left Button automatically. If user needs to use right button again, user has to touch the mouse icon again for changing the button function. Beep Turn on or off beep sound. Exit Close the PenMount Monitor function.
21
This page intentionally left blank.
22

▲Up To Search▲

Price & Availability of BPC-6170

	To Download BPC-6170 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .